Description du poste
Responsibilities:
Operation of the
Motor Grader:
Operate the motor grader safely and
efficiently in accordance with the manufacturer's instructions and company
procedures.
Grade, level and maintain quarry access
roads, internal haul roads and designated working areas.
Spread and level laterite, stone base,
granite dust and other approved road construction materials as required.
Maintain suitable road surfaces to
facilitate the safe movement of tipper trucks, loaders, excavators and
other heavy equipment.
Carry out levelling, shaping and finishing
of designated work areas in accordance with instructions from the Quarry
Manager or Site Supervisor.
Adjust the grader blade, mouldboard and
other operating controls to achieve the required road profile and surface
finish.
Assist in the preparation and maintenance
of stockpile areas, loading bays, parking areas and equipment operating
zones.
Operate the grader only within authorised
work areas and within the limits of the machine's capabilities.
Quarry Road
Maintenance and Drainage:
Inspect quarry roads before and during
grading operations to identify potholes, uneven surfaces, loose materials
and other road defects.
Grade and reshape haul roads to reduce
rough surfaces, improve vehicle movement and minimise avoidable equipment
wear.
Shape road surfaces and shoulders to
promote effective rainwater runoff.
Maintain roadside drains, side slopes and
designated drainage channels where required and within the grader's
capabilities.
Assist in repairing road surfaces damaged
by heavy truck traffic and adverse weather conditions.
Report blocked drainage channels, severe
erosion, unstable ground and other conditions requiring additional
equipment or corrective work.
Carry out road maintenance promptly to
reduce disruptions to quarry transportation and production activities.
Daily Inspection
and Equipment Care:
Conduct pre-start inspections of the
grader before commencing operations.
Check engine oil, coolant, hydraulic
fluid, fuel levels, tyres, brakes, steering, lights and other critical
components in accordance with the equipment checklist.
Inspect the blade, cutting edges,
hydraulic cylinders, hoses and other working components for wear, damage
or leakage.
Ensure that the grader is clean and
maintained in a safe and serviceable condition.
Report mechanical faults, warning...